more tidy

Cargo.toml

@@ -11,6 +11,7 @@ default-run = "treatbot-5k"
 [[bin]]
 name = "treatbot-5k"
 test = false
+bench = false
 
 [lib]
 harness = false

src/lib.rs

@@ -15,6 +15,7 @@ fn panic() -> ! {
 /// Terminates the application and makes a semihosting-capable debug tool exit
 /// with status code 0.
 pub fn exit() -> ! {
+    defmt::info!("goodbye");
     semihosting::process::exit(0);
 }
 

src/main.rs

@@ -1,89 +1,67 @@
 #![no_std]
 #![no_main]
 
-use defmt::{info, unwrap};
+use defmt::unwrap;
 use embassy_executor::Spawner;
-use embassy_stm32::flash::{Flash, InterruptHandler};
+use embassy_stm32::{
-use embassy_stm32::gpio::{AnyPin, Level, Output, Speed};
+    adc::{Adc, SampleTime},
-use embassy_stm32::{bind_interrupts, Peri};
+    gpio::{AnyPin, Level, Output, Speed},
+    peripherals::{ADC1, PA0},
+    Config, Peri,
+};
 use embassy_time::Timer;
 use {defmt_rtt as _, panic_probe as _};
 
-bind_interrupts!(struct Irqs {
-    FLASH => InterruptHandler;
-});
-
 #[embassy_executor::main]
 async fn main(spawner: Spawner) {
-    let p = embassy_stm32::init(Default::default());
+    let mut config = Config::default();
-    info!("Hello Flash!");
+
+    config.rcc.mux.adc12sel = embassy_stm32::rcc::mux::Adcsel::SYS;
+
+    let p = embassy_stm32::init(config);
+
+    let a = Adc::new(p.ADC1, Default::default());
+    let channel = p.PA0.into();
+    spawner.spawn(unwrap!(read_adc1_pa0(a, channel)));
 
-    // Led should blink uninterrupted during erase operation
     spawner.spawn(unwrap!(blinky(p.PA5.into())));
 
-    // let mut f = Flash::new(p.FLASH, Irqs);
+    Timer::after_secs(20).await;
-    // // Test on bank 2 so the CPU doesn't stall (code runs from bank 1).
+    treatbot_5k::exit()
-    // // G474RE in dual-bank mode: bank 2 starts at 256KB offset.
+}
-    // // Erase 4KB (2 pages at 2KB each in dual-bank mode).
-    // test_flash(&mut f, 256 * 1024, 4 * 1024).await;
 
-    //treatbot_5k::exit()
+#[embassy_executor::task]
+async fn read_adc1_pa0(mut a: Adc<'static, ADC1>, mut channel: Peri<'static, PA0>) {
+    loop {
+        let val = a.blocking_read(&mut channel, SampleTime::CYCLES12_5);
+        defmt::info!("read {}", val);
+        Timer::after_secs(1).await;
+    }
 }
 
 #[embassy_executor::task]
 async fn blinky(p: Peri<'static, AnyPin>) {
     let mut led = Output::new(p, Level::High, Speed::Low);
 
+    led.set_low();
+
     loop {
-        info!("high");
         led.set_high();
         Timer::after_millis(300).await;
 
-        info!("low");
+        led.set_low();
+        Timer::after_millis(300).await;
+
+        led.set_high();
+        Timer::after_millis(300).await;
+
+        led.set_low();
+        Timer::after_millis(300).await;
+
+        led.set_high();
+        Timer::after_millis(600).await;
+
         led.set_low();
         Timer::after_millis(300).await;
     }
 }
-
-async fn _test_flash(f: &mut Flash<'_>, offset: u32, size: u32) {
-    info!("Testing offset: {=u32:#X}, size: {=u32:#X}", offset, size);
-
-    info!("Reading...");
-    let mut buf = [0u8; 32];
-    unwrap!(f.blocking_read(offset, &mut buf));
-    info!("Read: {=[u8]:x}", buf);
-
-    info!("Erasing...");
-    unwrap!(f.erase(offset, offset + size).await);
-
-    info!("Reading...");
-    let mut buf = [0u8; 32];
-    unwrap!(f.blocking_read(offset, &mut buf));
-    info!("Read after erase: {=[u8]:x}", buf);
-
-    info!("Writing...");
-    unwrap!(
-        f.write(
-            offset,
-            &[
-                1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
-                24, 25, 26, 27, 28, 29, 30, 31, 32
-            ]
-        )
-        .await
-    );
-
-    info!("Reading...");
-    let mut buf = [0u8; 32];
-    unwrap!(f.blocking_read(offset, &mut buf));
-    info!("Read: {=[u8]:x}", buf);
-    assert_eq!(
-        &buf[..],
-        &[
-            1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
-            25, 26, 27, 28, 29, 30, 31, 32
-        ]
-    );
-
-    info!("Flash async test passed!");
-}